Waterproofing Building Materials

BUILDING MATERIALS: Waterproofing

● Alpha

● Beta

● Gamma

● Delta

Advantages:

– Absolute impermeability to water.
– Excellent high temperature performance.
– Excellent adhesion on any surface.
– High mechanical properties.
– Resistance to chemicals and bacteria.
– Rot – proof.
– Superb low temperature performance.

Available Range:

The standard range of BITUMODE products is shown in the accompanying schedule. The typical thickness available are 3 and 4 mm. surface finishes can be polyethylene film on both sides; one side polyethylene and one sand; or granule finish on upper surface. The nominal length of each roll is 10 meters and the nominal width is 1 meter. Custom specifications can be designed based on the need of the clients.

Composition of the Product:

1-Polyethylene, fine sand, or granules 2-Compound
3-Reinforcement 4- Compound 5- Polyethylene film

Product Data:
Roll length	10 meters + 0.1
Roll width	1 meter + 0.01
Thickness	3 or 4 mm + 5%
Softening Point ( Ring & Ball ) ASTM 36	150Co + 5 C°
Cold Flexibility UEAtc	-15 to -10 C°
Heat Resistance ASTM D 5147	120 C°
Tear Resistance DIN EN 29073	Long. P: 250 N G: 60 N Trans. P: 290 N G: 80 N
Elongation % ASTM D 5147	Long. P:> 40% – G: 3% ( + 0.15) Trans. P:> 40% – G: 3% ( + 0.15)
Tensile Strength ASTM- D5147	“Long.” P:800 – G: 400 (N/5 cm +20%) “Tran.” P:600 – G: 320 (N/5 cm +20%)
Static Puncture Resistance UEAtc	P: L4 G: L2
Dynamic Puncture Resist. UEAtc	P: I4 G: I2
Resistance to Thermal Aging ASTM G53	Pass
Impermeability to water UNI 8202	Absolute
Note: P= Spun-bonded non-woven polyester fabric. G= Reinforcing Glass fibers.